Air Supply Station “Mediline Air” – C&U

 This system is designed to deliver clean medical air stably to the hospital. Dual compressor automatically runs and stops alternately and parallelly. Either automatic or manual operation can be selected in each case.

 System composed of:

– Oil-free scroll compressor: Designed to deliver clean, oil-free air for hospital, clinical and laboratory use. With the combination of Air purification/Dryer unit and automatic controls, completely dried and bacteria free air can be supplied constant at 0.4MPa line pressure. There are standard 8 types from 1.5kw to 15kw.

– Air purification & Dryer unit: This unit performs dehumidifying, bacteria removal and pressure reduction of compressed air to supply medical clean air to treatment area. This unit is comprised of Membrane type air dryers, Air purification dual line filters and Air regulators.

– Air receiver tank: This is air reservoir for keeping the compressed air from the compressor. The purified and regulated air is supplied to the terminal outlets through the medical gas pipeline in the hospital. Vertical 210L, 400L, 600L,1010L and 1530L tanks are available. An appropriate one shall be chosen according to the capacities of the compressors in the plan.

– Air-cooled after cooler: Air-cooled after cooler cools the heated compressed air from the compressor to below 40℃ and efficiently reduces moisture in the compressed air. The condensed water is drained periodically or automatically. This fan-cooling type after coolers shall be free from troubles caused by shortage of water supply or freezing water.

– Control panel: The purpose of the control panel is to operate compressors for automatic alternate run at a normal consumption and automatic parallel run at a peak demand.

The system is designed as a duty compressor and a standby compressor alternate with run at 0.5 5 MPa and stop at 0.7 5 MPa usually, but for high demands standby one runs parallel with duty one at 0.5MPa and stops at 0.7 5 Mpa